This is an official Powerbookmedic.com take-apart guide for the Google Nexus 10 Tablet.

8 Comments Parts Tools

Duane

2 months ago
Nevermind. Found it. Laurent and Andrea, if you haven't found it yet it's probably the digitizer flat cable isn't all the way in the connector. that's what mine was.

Duane

2 months ago
Is this page still active? Same problem as Laurent and Andrea just below. Replaced battery and now touch screen doesn't respond. Can't see anything that I might have done. Please help.

Laurent

3 months ago
Same problem as Medic, just replaced the battery but the screen does not react anymore.

Andrea

3 months ago
I replaced the Nexus 10 battery, the screen turns on, everything works fine (displays alerts, etc.), but the screen does not react to anything! I checked the flat connectors, they seem perfectly fine. Can the digitizer just break like that? Any way to test it? Thank you!

Powerbook Medic

5 months ago
@MAV - it is hard to say. I would try with headphones first, then you may want to do a factory reset to rule out any software possibilities. After that it is probably the motherboard.

MAV6040

5 months ago
My nexus 10 suddenly lost audio.Help

Powerbook Medic

6 months ago
@Sri - you'd really have to get it opened up to see the extent of the damage. You'll want to look for corrosion on the motherboard to see if that needs to be replaced as well.

Sri Vidhya

6 months ago
i have google nexus 10 and unexpectedly there were some water dat got entered inside the tablet. the dis play got screwed off after that . Whenever i start , i feel the vibration turned on but nothing happens after that.How can we service it? Thanks.
View All

If you would like to leave a comment about the video, please type in your name and comment below.