CD won't mount in my Lombard module IDEAS?? PLEASE
Page 1 of 1

Author:  Guest [ Mon May 10, 2004 5:55 pm ]
Post subject:  CD won't mount in my Lombard module IDEAS?? PLEASE

I'm using the Bronze (333 sys 9.2.1) on the road with a CD in the drive. It spins on insertion for a minute but doesn't mount.

It's a 24x CD-ROM Module Model # M7388 (MKE #CR-175)

(It stops spinning after a minute.)

It has mounted faithfully for six years but now, on insertion. It just makes a short "buzz..whine...buzz whine...buzz whine " and then stops. Occasionally, it will mount a disc, about once in every 15 attempts.

I've cleaned the little laser glass to no avail.

Is this a software or hardware issue? If it's hardware, is it worth it to replace the module at about $275? Any cheaper path?

The book is a rock solid product with no troubles at all...ever and now it's getting cranky with this CD player. I'd like to sell it but want a working CD in it for that purpose.

Can you guru's please help?

Many thanks


Author:  powerbookmedic [ Sat Mar 05, 2005 6:18 pm ]
Post subject: 

It is a problem with the drive itself. Drive failure is very common. For replacement you have several options. Click on the link below to see the drives we offer.

http://www.powerbookmedic.com/xcart1/cu ... hp?cat=264


Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group