| PowerbookMedic.com https://www.powerbookmedic.com/forum/ |
|
| Lombard-Panther- startup process stops after Big Apple shows https://www.powerbookmedic.com/forum/viewtopic.php?f=2&t=1161 |
Page 1 of 1 |
| Author: | andysherman [ Sat Jun 11, 2005 7:40 am ] |
| Post subject: | Lombard-Panther- startup process stops after Big Apple shows |
Lombard 333 w/10.3.4- startup halts when the grey screen with the spinning circle appears- just keeps spinning & that's where it stays- HD grinds for a little while, then stops. Tried booting from CD (Panther & OS9), same problem. Got it to start boot from OS9 partition, but froze after loading the first extension (E-Net). After looking at some of these threads, looks like it's the processor/daughtercard? If that's the case, I'm done with this PB- I've spent many $$ upgrading, replacing (AC adapter, power board, etc,)- unless the processor replacement is DIRT CHEAP... Thanks for any help... |
|
| Author: | andysherman [ Sat Jun 11, 2005 9:55 am ] |
| Post subject: | |
Additional info- when booting from Panther Install CD, get lines of code on screen- last line says "panic- we are hanging here". Other lines- "proceeding back via exception chain" "no Debugger configured- dumping debug information" Hope this helps... I'm ready to take out the drive & RAM & throw in trash or sell on eBay for parts... |
|
| Author: | justin-pbmedic [ Mon Jun 13, 2005 12:40 am ] |
| Post subject: | |
try pressing shift during bootup to start in safemode.. see if that gets anywhere and report back. |
|
| Author: | andysherman [ Tue Jun 14, 2005 6:54 am ] |
| Post subject: | |
Nope- same thing happens... |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|