| PowerbookMedic.com https://www.powerbookmedic.com/forum/ |
|
| display dark after restarts https://www.powerbookmedic.com/forum/viewtopic.php?f=2&t=1142 |
Page 1 of 1 |
| Author: | nofo [ Mon May 02, 2005 7:56 pm ] |
| Post subject: | display dark after restarts |
Help, My display will appear black upon a restart or upon waking from sleep. This happens about 60% of restarts. Granted now that I run sys 10.3 I rarely have to restart, but if I do, I have the chance that I will have to shut down for a few seconds before restarting so that I can view my screen. If I look at the screen at just the right angle (when it goes black) I can see that the images/desktop are up. It's like a very dark dark room. I can just make out the furniture...Sometimes I can navigate to the restart menu, but most times I have to hit the power down button in the back of the powerbook, wait a few seconds and start up. Also, from top to bottom, my screen has a noticeable shift in saturation. Images toward the top are just a half shade richer than the bottom. This problem showed up just before the dark problem Is this a display problem, or a display light problem. Is the display converter going goofy? Any thoughts would be greatly appreciated. I need my powerbook for print work and this diplay problem is one that I'd love to fix. Thanks -nofo |
|
| Author: | justin-pbmedic [ Sun May 22, 2005 9:05 pm ] |
| Post subject: | |
I would say its the inverter board going bad since you say the largest problem is the extremely dim screen. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|