| PowerbookMedic.com https://www.powerbookmedic.com/forum/ |
|
| Digitizer not working https://www.powerbookmedic.com/forum/viewtopic.php?f=17&t=2897 |
Page 1 of 1 |
| Author: | flynn78us [ Tue Apr 26, 2011 3:11 pm ] |
| Post subject: | Digitizer not working |
Well I installed a glass and digitizer assembly to my 3GS the LCD works but I cant unlock it or turn it off. It seems that the connection(cable 2 I think) isn't locking into the board correctly. I checked my old LCD/digitizer assembly in and they work fine. Thanks to anyone who can help. |
|
| Author: | justin-pbmedic [ Mon May 02, 2011 9:41 am ] |
| Post subject: | Re: Digitizer not working |
If your old one still works, but a new one you bought from us does not, there could be a defect. You'll want to contact customer support using the Support section at the top of the site or giving us a call. |
|
| Author: | qpb1234 [ Mon Sep 03, 2012 4:37 am ] |
| Post subject: | Re: Digitizer not working |
Maybe the digitizer had been damage when you fix it. |
|
| Author: | flynn78us [ Fri Oct 12, 2012 9:08 pm ] |
| Post subject: | Re: Digitizer not working |
Old thread. Look at the date when u post. But thanks for the response. It was a bad digitizer. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|