Mac Repair and Mac Parts from Powerbook Medic


Easy Search [ ? ]
 

How to Replace the Unibody Macbook Glass LCD

September 25th, 2009

How to Repair Unibody Macbook Glass It used to be that if your screen cracked on your laptop, you’d just replace the LCD and be done with it. That unfortunately is no longer the case. With the introduction of the Unibody Macbook and Macbook pro models, Apple changed the design of the display assembly. Now, [...]


82 Responses to “How to Replace the Unibody Macbook Glass LCD”

Pages: [3] 2 1 » Show All

  1. 82
    Bradley Says:

    @ Kevin – No, you don’t have to remove the body.

  2. 81
    Kevin Says:

    Do you need to remove the screen from the body of a MacBook Pro (15″, mid 2012) prior to changing the glass?

  3. 80
    Bradley Says:

    @ Peter – You need to get the display for your model year. Any screen will not work.

  4. 79
    Peter Says:

    I have a 2010 Macbook Pro model A1278. The screen (LCD and glass) is cracked, so I know I need to replace both parts.

    Here’s my question: will ANY A1278 screen work, or does it HAVE to be a 2010 screen? Is the screen of a 2010 A1278 different than one for a 2008 A1278 (for example)?

    Thanks

  5. 78
    Bradley Says:

    @ shreyas – You likely need to replace your LCD to fix that issue.

  6. 77
    shreyas Says:

    I have

    MacBook Pro 13.3″
    Processor:2.4GHz Core 2 Duo (P8600)
    Model #:A1278
    Production Year:2010

    and on screen there are 3 vertical thin lines appear ( Blue, Yellow and red ) constantly ( No blinking ) I see them constantly , what I need to replace and which parts I need to order from this website ( Please suggest tools also )

    Thanks

    Shreyas

  7. 76
    Bradley Says:

    @ Bill – You’ll have the replace the LCD to fix that issue.

  8. 75
    Bill Says:

    I have vertical lines, about 1″ wide appearing on the right third of my 15″ unibody screen. They were intermittent at first, as I could apply pressure and they’d go away. If I follow your instructions to access the screen, is there a place where I may find an unseated portion of a cable or aspect of the LCD that I can reseat, or do you think I will need to replace the entire LCD display?

    Thank you!

    Bill on Vashon

  9. 74
    Bradley Says:

    @ Diego – Yes, the procedure is the same.

  10. 73
    Diego Says:

    Hi There, I was wondering if this procedure it is possible also with Macbook Pro 13″ late 2011 models.
    Thanks

  11. 72
    Bradley Says:

    @John – With liquid damage it is hard to tell. It could be the logic board or the Display. We do offer a free diagnosis service if you wanted to send the machine in to us to be professionally diagnosed.

  12. 71
    John Says:

    I’ve got a 13″ A1278 MacBook Pro, which had a small amount of plain water spilled over the keyboard area.

    After drying etc…the laptop physically powers up correctly and seems to work in every way with the exception of the display which is definitely on (if I point a torch at the screen and look carefully, I can see everything from bootup to desktop correctly)

    I’ve had a look at the cable & logic board connector and there seems to be a small amount of black on the cable pins which may/may not have been there beforehand.

    In your opinion, could this be an LCD backlight fault (they don’t have inverters do they?) needing a new screen or maybe a cable fault or something else?

    Thanks in advance!

  13. 70
    Bradley Says:

    @Bob – The part is $179.95 and labor is $95. You can give us a call at 1-866-726-3342, option 2 to speak to our repair department.

  14. 69
    Bob Says:

    we have a 17″ macvook pro with anti glare display screen. Nom the display is scratched. display is fine but the scratch mark is viosible. I was wondering hpow can that be fiixed? Apple wants over $500.00. if I send my laptop to you what is the turn arround time and total cost.
    if i want to do it is there any guide? one vodeo I watched shows to take out entire display apart and reinstall it. can I just install the glass?

  15. 68
    Bradley Says:

    If you have a 17″ Macbook Pro, then your LCD should be 17.1″. If your LCD is 15.3″, then you have a 15″ Macbook Pro. We sell the glass for the 13″, 15″ and 17″ Macbook models at our online store.

  16. 67
    Fred Wydler Says:

    Great Advice

    I have a MacBook Pro 17″ with a 15.3″ display that needs a new glass. The LCD still works fine. Does anybody know where I can find such a glass. I believe that the same instructions as for the 15″ model still apply. Thanks, Fred

  17. 66
    Bradley Says:

    I’d remove the glass, clean it, and then replace the adhesive strips with new ones.

  18. 65
    Steen Says:

    I have a late 2008 Macbook Unibody 13.3″. The glass i not broken. The adhesive strip on the bottom under the name Macbook is slipping. If I daily press a finger along the bottom egde, it will hold. If I forget a day or two it will slip. Some dust has managed to come in behind the glass. Most not visible when the LCD is lit. On larger speckle is however quite annoying. In the long run not satisfying and more dust can be expected I guess.
    I am afraid that I have to take of the glass? You say it should be possible without disassembling the the casing and everything. I guess I would start with the bottom of the glass since it is where it slips, but I feel the space for manouvre is very thight if I start just there. Any suggestions? Two more questions. Can I use any adhesive strip or should I have you send them to me (europe) and please some clever advice for removing dust and cleaning the glass and the LCD. Hopefully I will never come there again.
    Thanks in advance

    with the bottom of teh glass

  19. 64
    Bradley Says:

    If you don’t see dark blotches on the screen, then most likely the LCD is fine and you just need to replace the glass.

  20. 63
    Tye Says:

    I’m Perty sure just the glass is cracked on my 15 ” pro how can I b sure? Thanks in advance

  21. 62
    Bradley Says:

    It will technically fit, but you’ll have a metal sliver on the top of the display from where the bezel doesn’t cover the LCD frame and you’ll also have metal exposed on the corners from where the later generation models were more square than rounded. You’ll also have uneven edges, but it will technically work.

  22. 61
    James W. Says:

    Hi,

    I would like to know if this 13″ Macbook Unibody screen would fit on an older Macbook 13″ White..I want to mod it
    like the link below.

    http://i37.tinypic.com/28aumg2.jpg

Pages: [3] 2 1 » Show All

Leave a Reply

* Any prices mentioned in this blog are valid for the date of the blog post only and are subject to change.