@Genius - I would do a factory reset to rule out any software issues first, then I'd try replacing the camera.

Iphone camera is not working

very nice cell phone

@vampy - if you aren't getting a wireless signal at all even right up next to the router, it is probably going to be a logic board issue.

hi. i have a problem. on my iphone 3g wirreles not working. its grey and cant use it to start and scan. like there is no wirreles board inside. can you give me an ideea to repair?thx

@Daniel - most likely the cable came unplugged while putting it back together or it got torn. You'll just have to go back in and inspect the cable and connectors to see what needs to be reseated or replaced.

thanks for the video. i change the touch of my Iphone 3g.afterwards,nothing happens to display on the screen.i do get calls,my phone do show on my PC when connected. what can i do to get my phone back to shape?

@me - I would double check you have all the settings right on the router and the correct security key if one exists. Otherwise, it is probably a logic board issue.

my iphone 3g can detect the wi-fi but can't connected even the wifi icon above also didn't appear

my iphone shows NO SERVICE i tried to change the sim card but still not working..

@Phuon - I'm not sure what you mean. You may want to send it to us to take a look at.

Hi.. I opened the phone to replace glass screen... Now the screen on display is the screen is 45•... If I lower it the screen turns white... How can I fix this?

@paige - I would recheck all your connections inside, especially the battery. If everything seems fine, hook it up to your computer and see if it syncs up.

i took my i phone 3 apart to fix y home button nd now it wont turn back on how do i fix this it was working before i took it apart

@G Smith - now that's a weird problem. We've never seen that. The cheapest guess that I'd try first is a possible short in the mute switch? so try that first.. after that logic board. We wouldn't mind seeing that one in shop to diagnose if you can't figure it out.

Thank you very much for your prompt reply. However I should have added that this only happens when the ringer is turned on. If I turn the ringer off the display doesn't cycle on and off. But what good is a phone with the ringer off?

@G. Smith - I would try booting it into DFU mode and see if it'll stay on and if so I'd restore it in iTunes. If not, it may be a bad battery or worst case a logic board.

First of all I found that this is the best fixit site on the net. Very prompt with orders too. However I have a problem with my Iphone 3g. The display only cycles on and off. off for 14secs and on for 5secs. Any one have any suggestions?

If ur iphone wont turn on. Press and hold the sleep and welcome button while its charging till it goes off. Unplug power cord from phone then hold the sleep button while plugging it back in. Keep holding it until it shows a picture of it connecting to iTunes. Going to iTunes and click restore mode. Everstar your phone your previous state and to work after that

@ruben - it is most likely the LCD or the LCD got unplugged inside, so you'll probably want to open it up first and see if its an easy fix.

i can heard my phone when i get a call and tx message but the screen is not working. its just black what should i do is it the lcd.

@Muhammad - there are several possibilities. It could be the screen, logic board, or battery. If nothing at all is coming on the screen and it is not being seen by your computer, it is probably the logic board. You may want to send it to us or take it somewhere to be professionally diagnosed.

MY PHONE IS NOT TURN ON WHY???

i like iPhone 4

gracias esta exclente wonderfull!!!

@vasco - try holding it right next to the wireless router and see if it detects it. If it does, you probably have an antenna issue causing a very weak signal, otherwise it is probably the logic board due to some defect in the wireless hardware.

i have also reset my network settings on the iphone and had left my wireless network without any password for connection so it can be easily coonected...my other devices are easily able to connect my network except for my iphone

hey ur video is really gud.... i m turning on my wifi setting on but my iphone is not able to detect any wireless network. it had detected once, so i tried to connect it but before i could connect it it was already vanished...please help

guys my model of apple a1241 stucked during restore and no one can help me as i asked around !!!!!! what a f???

@jay - you'll need to sync it up to your computer and factory reset it to get past the password.

i have a model # a1241 that i cant remember the passcode to unlock phone , can you guys help me , please ?

good

Thanks dude!!!

thank you!!!!!!!

This video was a great help to me !! I now have my i Phone working again, I dropped the phone & one of the internal plugs became disconnected . All good now MANY THANKS

Muy Bueno

@Shankar - we do not offer support on unlocking phones. Google is your friend.

@reezan - yes you can. We sell it in the part list to the right.

Can you tell me how to unlock apple iPhone(a1241)

Can i exchange my front full glass?coz it is little bit scratch

@jarz - you need to eject the tray and put the card inside the tray. there should be a small hole in the tray that you need to insert a tool or paperclip to get it to pop open.

pls xplane me insert the simcard

Muy didactico

@Kev - yes. We sell it in the list to the right.

can the battery in a 3G s be replace

how can i get the version running in my iphone 3g?? tnx much. its model is A1241

Not seen elsewhere or here: there are five different screws used in the 3G. I recently restored one-such, and had an 'unknown error' when trying to connect to iTunes after re-assembly. 2nd tear down and looked carefully at everything to discover FIVE different but similar looking screws. An ex-radio-tech, I sorted which ones should go where, re-assembled, and it worked perfectly. Obviously a wrong length screw was shorting something out somewhere. Suggestion. Before taking apart: draw a rough sketch of each layer, and place each removed screw onto some sort of sticky stuff (bluetack?) on the sketch to reflect it's position in the phone. May be able to upload some example photos taken, but given this 70 year-old brain I wouldn't count on it :)

Once again a great service, appreciated. A suggestion re the lower speaker and mic grills: I eBought an old 3G which was very dirty - it had worked hard - and the grills were almost totally blocked. No compressed air at hand, but do have some Japanese Kao brand clothes washing detergent called 'BioZet Attack'. It is a superb cleaned, when give time (it will remove 10 year old acrylic paint!). Very effective. Remove the phone screen, logic board and lower mic/antenna/connector block (3 screws). In a suitable sixed squareish container add enough water to cover the grills, and and a small pinch of the detrgent powder. Let disolve, then carefully stand the grill portion of the phone in the mix. Leave for a couple of days. Check with a jeweler's loupe (about 10x) to see if the laser-cut micro holes are clear. When they are clear, carefully rinse and dry, then reassemble. Your calls quality will be dramaically clearer! Now I'm off to try the DFU suggestion. Thanks again.

At around 3:45, this asks you to lift the LCD from the digitizer mechanism. I did this, and damaged the LCD from attempting to remove it exactly where it shows. I would strongly recommend to gently pry it from the sides where you removed the screws to lift it at first, that was the tool you use to pry it with will be kept from touching the actual screen.

@bill - typically the display will still work with a cracked display. the lcd may have had more severe damage. also if you see any corrosion around where the LCD connects, the logic board could still be bad. not much you can do at this point besides trying a new LCD.

a friend got a a1421 from a flea market as is and when got back and connected to charger, got nothing on screen. i disassembled per video and found some corrosion around batt terminal and minor sighns of water damage and a cracked lcd. when i cleaned and dried in rice and reassembled still nothing on screen but computer recognized the device and installled drivers and will even browse the pictures on the phone memory.. no sim in it or with a valid att sim with sp data package. what would u suggest i try? will a crack in lcd prevent from starting ? and does it sound like the logic board is ok since computer recognized and communicated with it

@Changdev - that sounds like you need a new digitizer based on your description. We sell it in the list to right.

My iphone A1241 having ocking problem when we ON the phone is going on but when scroll unlock is open but after that no any functions operates . Pls advaice what is the sllution for that . I am waiting for your replay.!

My husbands phone isn't holding a charge. He noticed there's an actual crack on the back hard part where you connect the USB device... Any suggestions as what he can do?

my a1241 iphone hung probleme i reset but not start

@Hugo - this is the guide for the A1241. If you are wanting the original Apple manual that was included with the phone we unfortunately do not carry it.

Please, could you help me to get the manual for a iphone 3G A1241.? Thank you very much

thank you PBM. you guys are awesome! keep up the great work! :D

@chad - if you stand right next to the wifi router and it doesn't detect it, it would probably be the logic board at this point.

My iphone works great. only problem i have is wifi. it connects to 3g network, but wont connect/find to any wifi connections. just says finding wifi connections... then stops looking. i replaced the wifi on it. and still doesnt work. so that means its a logic board problem? please reply as soon as u can :(

@1234 - we don't do any support or service on fake Apple devices.

A chinese mini iphone i have.

Today I bought a mini-iPhone, but do not want to activate the SIM card, even if I do a new one he does not, what should I do, ps I got it from a dealer and gave no guarantees.

Thanks bro,helped me out a lot

@austin - i really haven't seen any different revisions to the point of the connections changing. If you could put your serial number into our ID Your Mac page and respond with what your sales number is in the Details tab, I can try to look into it further.

i have iPhone 3G (A1241). but its different inside. different numbers and different for your connection 2 and 3. and ideas on wats happened and how to fix it. cheers in advanced

Great

@dan - you most likely will need to replace the headphone board.

my phone has no sound stuck on headphone mode

excellent talk through and explanation very easily explained.

Thank holy hell for this video. I am so happy to have my baby brought back to life after being dropped in the toilet last night. I love you Powerbook Medic<3

@swimgirl - rice is a good method used a lot for wet electronics

I watched video and took my phone apart. Then I used hair dryer to dry inside. Should I put the pieces in a bag with rice or will that mess up the inside of phone with rice dust?

@Jeezzy - you'll probably need to try and restore the phone in iTunes and you may need to go into DFU mode to do that.

The apple comes on my phone but nothing else happens

@Tatiana - if the LCD is broken, you'll need the LCD. If the glass/touch part is broken, you'll need the Glass And Digitizer Panel as well.

Hey I got a problem with my iPhone and it is that it was first just white screen and I sent it to a person that I tought he may help me but what he done instead was to give me my phone back with the screen broken and what I want to know if i have to change the LCD screen plus the touch?!

Hey I got a problem with my iPhone and it is that it was first just white screen and I sent it to a person that I tought he may help me but what he done instead was to give me my phone back with the screen broken and what I want to know if i have to change the LCD screen plus the touch?!

@Magnus - that is typically going to be the LCD, but it is hard to say with liquid damage without seeing inside.

I have the problem with the display not lighting up when i turn it on after being damp, everything else work but I can not see much.

This video leave out some details like how to unmount the frame and speakers protection, camera ring. I tried to setup a new housing replacement. 3 times assembly and unassembly my phone so I suggest to include in the video all the details.

@sathish - it sounds like you may have a bad battery

mobile connect via data cable mobile is on ( only screen in appear I TUnes ). but normal mode no power on. what i do . please

@Marry - that typically means the battery is dead or in the case of liquid damage can mean the contacts may be damaged on the main logic board inside. Be best to get it professionally diagnosed at this time.

My iphone droped in water so i open it and left it open untill it was dry, i put it back togather and when i connect to my pc it show a battery with a red line on it, i need to know what it means

@taylor - with water damage, it could be several things with usual damage being the logic board. You'll probably want to open it up and see what is damaged or take it somewhere or send it to us for diagnosis.

my firend gave me her broken i phone 3G i think its water dammaged or heat damaged what do i do

my firend gave me her broken i phone 3G i think its water dammaged or heat damaged what do i do

MY DOUGHTER DROP MY IPHONE 3G IN HER MILK AND NOW IT DOSE NOT WORK, IT TURNS ON THE SCREEN IS LIGHT AND THAT IS IT, I NEED TO KNOW WHAT PART I NEED TO CHANGE, THANKS

@laura - you probably should take it somewhere or send it to us for diagnosis. it could be a battery issue, dock connector, or logic board.

so my iphone3 wont turn on or change what should i do?

@feddry - it'll require replacing the logic board. we sell it on our site in the product list to the right.

@Powerbook Medic step I had done 1. restart iphone 2. restore via itunes and approximately when hit in the logic board or its audio IC, what it costs

@feddry - so the headset speaker works but then stops? that's fairly weird. I would try all of the software possibilities first. Turn the phone completely off and back on and see if it does it. Then restore the phone in iTunes. If that doesn't fix it, it may be the speaker itself, but it is more likely the logic board has a short.

I have iphone 3G and when a phone call or my calling to over 1 minute, I can not hear my opponent talking unless I switch to loudspeaker, about the hardware or software problem? if a hardware problem, about what I should instead, for my iphone back to normal

how i can set diffrent ringtone like mp3

my wifi doesnt work i tried reset the network but its still the same what can i do.

@James - you'll need to restore it with iTunes.

set to recovery how to fix it?

@jessica - you'll need to sync it up and possibly restore it with itunes.

how do i unlock a 3g iphone without knowing the passcode?

@shomen - if the battery is completely dead it can take a few minutes plugged up for it to get enough juice to show something. I guess at this point if its completely working you could either keep it like you said or sell it for some decent money. People like the out of contract iPhones.

Now tell you what? After arranged a new replacement Iphone4(A1332) the A1241 started to show a flash symbol on screen again when pressing the front-button. The battery must have been completely empty that is clear. Plugged it into the charger and the thing started to charge up again. We have to be aware that it could not connect to the 3G network anymore since the number was transferred to new handset. Is there any hack possible over the 3G network we were not aware of that could have caused it to crash and drain the battery completely? Will use it as a Wifi IPOD now as long as it wants to work ;)

btw, just for the record it was in the pocket of my blouse in stand by. Suddenly I fellt something hot there took the phone out and noticed that the display was on to let me unlock it but not responding to anything.. then it blacked out, died I guess...maybe CPU? Understand from your answer that even with a dead battery there should be some sign when connecting external power to it, right? thanks for the advise anyway.

No there is no life in it anymore when plugging it in on the PC or in the normal Apple charger. However an external battery unit lights its blue LED up meaning it is charging but still no life in the handset. This looks like more severe trouble?

@Shomen - you'd really have to open it to see. Typically it will still show something on the screen when you plug it up even if it is the please charge symbol.

Hi PowerbookMed, The iphone 3g (a1241) got very hot today and then stopped working. Is it likely that the chemistry in the Li-Ion battery was doing strange close the dangerous temperature level and then the build-in safety switch disconnected they failing battery? this could be repaired by just changing the battery or something else could be damaged? cheers!

hi my iphone 3gs has been playing up for a while it wont connect to wifi when i want it to it says there is no wifi present when i know there is and my 3g network doesn't work properly either i am with optus and was in sydney now i have moved to a remote country area and the reception is dodgy as my my friend with the same iphone with optus as perfect reception is there sonmething i can buy to have this fixed!

Found an iPhone in some wet grass. Been there a month... Took it apart and did this. Works fine now, except for the standby button doesnt work? (And I got in contact with the guy who owned it, he said I can have it, he got a new one free)

My boyfriend locked my iphone because he thought i was cheating. And i dont know how to unlock it.. DOes any one know how to unlock an iPhone 3G ???

The one button at the bottom stopped working, anything I can do to fix that? I took it completely apart cleaned out some dust and sand with compressed air but the button still doesn't work.

@Marc - it is most likely the cable from the LCD needs to be reseated.

I took my 3g apart to change the back housing, now once i put it back together the screen doesn't work. Anyone know why?

Damn damn damn, it was working fine, but still had cloudy screen, so took screen apart, now i have damaged the LCD display, and it turns on and its all white, i can hear texts coming in and phone ringinf but display is just white? how much is a new lcd? or prior to that any ideas? Thanks

thanks for response, i tookconnectors 1 2 & 3 off put hairdryer on it for few minutes then left apart for 24 hours, screen still bit dodgy but i was not brave enough to take all apart,home key now works and all fine thanks to your site.

@Maria - it is really hard to say. With liquid damage, it really depends how much it had a chance to damage and how much is corroded inside. You can open it up and take a look around for corrosion or send it off to us or take it somewhere locally to diagnose.

hi, i dropped mine in the bath was submerged for sometime, sreen a bit warped, and home button does not work,i have taken apart for drying but not disconnected anything else just yet, what do i need to do to get home button working again? do i have to disconect all the connectors? thanks

@gemma - typical repair costs if the logic board is damaged will be more than just getting a new phone under contract for $99-$199

Thanks for the video, dropped lotion on the screen and it got into the speaker,now I' cant hear unless it is on speaker is on, unfortunately this did not help because that portion of the speaker inside is covered with metal, I did however manage to break my screen while prying it off, just a little, so maybe it will be okay, now putting it back together will be the task...

I dropped my phone in water but the apple store said once you do that it needs replacing. Is there anything i can do?

@Wes - compressed air is usually best.

thanks for this! What should I use to clean the inside? I have never had my iPhone in a case, so it's got a bunch of dog hair, lint, drywall dust all goobered up in there.

Well phone is working fine now. Maybe the button just needed drying out? Because I did that too.

@Andrew - there would be too many other pieces that would have to be switched out for it to work to be feasible.

Hi mate Thanks for the video, was very helpfull, i just took my iphone 3G apart because the home button was not working. I adjusted the conectors, put it back together and its working. Awesome

will a 3gs logic board fit in 3g case?

@Dan - I would check to see if it comes on when you try to sync it up to a computer. If nothing at all comes up, there is probably an issue with the dock connector.

HI, today I went to replace my iphone digitizer, but when I reassembled the phone it will not turn on. I did take the mainboard out to look at the battery, but I thought I had gotten everything put back together correctly. Any ideas on what could be going on?

@Matt - yes. You may need additional tools such as a suction cup.

really silly question, but i just wanted to be sure. the iPod Take Apart Tool Set that is for sale will also work on the iphone 3g correct?

@jordan - with water damage, it is really difficult to see the extent of the damage without opening it up. most likely your logic board is toast and it isn't repairable.

i phone was dropped in water now all it shows is red charging light verry dim and wont do anything else

@mb2001 - yes you'll need a new headphone board.

When I use my headphones, I only get noise out of the left side earpiece. I could wiggle the plug where it plugs into the phone and get it in both ears but not now. What do I need to replace? Would it be the headphone board? Also tried other headphones and same problem

@Maressa - Try googling DFU mode. Try getting into that mode and then syncing it up to the computer and see if it'll let you restore. If not, your phone most likely is not feasibly repairable.

I got water in mine and didnt realize it for a while so did not get to start trying to fix until a few hrs later... i opened it up to dry and i also tryed the bag of rice trick... it wants me to restore but when i try itunes says and unknown error has occured and it cannot restore... do you know how i could fix this???

Thanks for this great video, had a mate that dropped his phone in sink, took it apart as instructed by this video and placed in sauna to dry, put back together and works perfectly.

on my iphone it showed a message that said IMEI AND ICCID unknown can this be fixed...

Thank you very much most usefull' but I 've got one fake Iphone 1241 from LA.I must to take my monney back...better let animal human be richs

I insert my sim card and nothing happens....like there's no network and WiFi isnt available.....any help

@Joe - You most likely have a problem with your digitizer. It could be partially unplugged inside or damaged and in need of replacement. We sell it on our site.

the top half of my phone is not working on my screen. Does anybody know what wrong.

@ LauraB - The first thing I'd try is to restore the iPhone to the original settings in iTunes and see if the issue resolves itself. That will tell you if it is a hardware or software issue.

my iphone 3G will NOT ring!! if you go to the settings everything is correct and if you test the ring it does ring then..but NOT when rcving incoming calls...???? any ideas?

Thanks! But am not being able to re-assemble and switch on... Cable 3 must be giving some problem...Any help around?

ok so i have just recently repaired my iphone 3g. I had to replace the digitizer and the internal earpiece. the digitizer works great but still no sound out of the earpiece. My question is... when replacing the earpiece assembly the prongs on the back... are they positive and negative? the are not marked so im thinking I may have installed it backwards... Does any one know about this repair?? I cant find anything out there on it.

should have read the coments before i tryed to remove the lcd... do not use a screwdriver

Any videos on how to replace the home button??

Word of advice...when trying to remove the cracked the glass from the frame by heating it up to melt the glue...BE CAREFUL not to overheat the HOME button...I warped mine and had to then rig it up for it to function properly. All the videos out there and not one mentioned this.

Word of advice...when trying to remove the cracked the glass from the frame by heating it up to melt the glue...BE CAREFUL not to overheat the HOME button...I warped mine and had to then rig it up for it to function properly. All the videos out there and not one mentioned this.

DO NOT...I repeat..DO NOT use flathead to lift lcd from assembly...just use fingernails or something thin to wedge open the side tabs and lift up the lcd gently with plastic pry tool (or with finger). Should come right out.

Cable 3 sucks big toe to put back in and to make it stay when trying to connect cable 2 back on (even if the little tab is pressed back down on it).

It is much easier to remove front by using a suction cup...I removed it in like 5 seconds.

couldn't you have at least mentioned that if you press too hard while removing the screen the LCD ink will crack and leak causing damage to your screen?

The video is very good but unfortunately requires QT pro to be downloaded; is there any workaround for this? thanks!

Very nice! It will be much more nicer if there is manual with picture like ro_bee_lee does for different mobile cell phones.

Thanks for this video, you made it easy to identify how to take the phone apart without breaking the phone. I just hope I get all this piss out of my sons iPhone. He needs a toilet guard!!! LoL

How do you replace the silent switch on a 3G iPhone

I agree, it is helpful but there needs to be a video to put back together

@Stefan - There's a drop down box just above this section where you can choose a video to download.

Excelent! How I can download this mowies....!

It would be helpful if you gave instructions on how to put it back together again.

If it doesn't work after it has dried out, then it likely needs to have the logic board replaced. However, generally with water damage, multiple parts can fail inside the unit, so it may just need to be replaced.

mine has water damage, left it to dry for a week now it wont turn on...... any ideas?

droped it in the toylet did this and put it in some rice and it works fine

Dropped my phone in some water, used this video to take it apart. Works great now!! Thanks!

iPod USB Cable

Price Starts at: $1.45

iPod Original Earbud Headphones

Our Price: $9.95

iPhone 3G Glass And Digitizer Panel Assembly

Price Starts at: $14.20

iPhone 3G LCD Assembly Panel

Price Starts at: $9.55

Extended Life Battery Upgrade Kit - iPhone 3G

Our Price: $18.95

iPhone 3G Headphone Board

Price Starts at: $0.56

iPhone 3G Home Flex Cable

Price Starts at: $2.21

iPhone 3G Midboard

Price Starts at: $2.99

iPhone 3G Speaker

Our Price: $12.95

iPhone 3G Hold Switch

Price Starts at: $0.85

iPhone 3G Vibrator Assembly

Price Starts at: $0.90

iPhone 3G Antenna Flex Cable

Our Price: $7.95

iPhone 3G Digitizer Glass Adhesive Strip

Our Price: $1.95

iPhone 3G Back Case (Black)

Price Starts at: $3.89

iPhone 3G Microphone w/ Flex Cable

Our Price: $14.95

Apple USB Power Adapter for iPhone and iPod A1265

Our Price: $6.95

iPhone & iPad Sim Card Removal Tool

Our Price: $4.95

iPhone & iPod Suction Cup

Our Price: $9.95

USB AA Battery Charger for iPad iPhone and iPod

Our Price: $29.95

iPhone 3G and 3GS Induction Flex Cable

Our Price: $7.95

Micro Sim Cutter and Adapter for iPhone 4, 3G, 3GS and iPad

Our Price: $17.95

iPhone 3G and 3GS Headphone Piece

Price Starts at: $0.95

Screw Set for iPhone 3G

Our Price: $1.09

Sim Eject Mechanism for iPhone 3G

Our Price: $0.21

Camera Glass for iPhone 3G

Our Price: $0.21

Camera for iPhone 3G

Our Price: $2.66

Volume Rocker for iPhone 3G

Our Price: $0.81

8GB Logic Board for iPhone 3G - Working

Our Price: $39.95

Original Battery replacement for iPhone 3G

Our Price: $1.65

Chrome Frame for iPhone 3G

Our Price: $1.66

Mute Switch for iPhone 3G

Price Starts at: $0.85

iPhone 3G Sim Card Tray

Price Starts at: $1.65

Wi-fi Cable for iPhone 3G

Our Price: $1.00

Dock Connector Speaker Assembly for iPhone 3G

Our Price: $2.36

LCD with Digitizer Home Button for iPhone 3G

Price Starts at: $19.95

16GB Logic Board for iPhone 3G

Our Price: $59.95

No image available

iPhone 3G Original Box

Our Price: $2.95

No image available

iPhone 3G Home Button

Our Price: $0.48

No image available

iPhone 3G Back Case - White

Our Price: $19.95

iPod Earbud Headphones with Mic and Volume

Our Price: $8.80

TORX (r) T8 Take Apart Screwdriver Tool

Our Price: 4.95

TORX (r) T6 Take Apart Screwdriver Tool

Our Price: 4.95

Aluminum G4 Display Take Apart Tool (New)

Our Price: 29.95

Apple Black Nylon Flat Probe Tool (NEW)

Our Price: 3.90

Thermal Paste Grease for Mac Repair

Our Price: 9.95

Phillips Head #00 Take Apart Tool Screwdriver

Our Price: 2.95

Orange Anti-Static Tape Strips

Our Price: 6.95

TORX (r) T10 Take Apart Screwdriver Tool

Our Price: 4.95

iPod Take Apart Tool

Our Price: 1.98

iPod Take Apart Tool Set

Our Price: 6.95

Mac Repair Tool Set

Our Price: 12.95

Tri-wing Screwdriver

Our Price: 7.95

Phillips Head #0 Take Apart Tool Screwdriver

Our Price: 1.95

Metal Spudger Probe Tool

Our Price: 2.90

Flathead 2mm Screwdriver

Our Price: 1.95

5mm Nut Driver

Our Price: 7.95

Soldering Iron for Mac and iPod Repair - 60 Watts

Our Price: 14.95

iPhone 3G Digitizer Glass Adhesive Strip

Our Price: 1.95

Thin Putty Knife for Mac Repair

Our Price: 8.95

Heavy Duty Suction Cup for Mac Screen Repair

Our Price: 6.95

iPad Opening Tool for iPad Repair

Our Price: 4.95

TORX (r) T5 Take Apart Screwdriver Tool

Our Price: 4.95

iPhone & iPad Sim Card Removal Tool

Our Price: 4.95

iPhone & iPod Suction Cup

Our Price: 9.95

Apple Microfiber Cleaning Cloth

Our Price: 7.95

TORX Plus (r) 4IP Screwdriver

Our Price: 13.95

iPhone 4 TORX Plus 5 Point Pentalobe Screwdriver Opening Tool

Our Price: 8.95

Stainless Steel Tweezers

Our Price: 3.95

MacBook Unibody Battery Access Screwdriver

Our Price: 15.95

MacBook Air 5-Point Pentalobe Screwdriver

Our Price: 12.49

Screwdriver Set for Sony Playstation Products

Our Price: 9.95

Xbox and Kinect Tool Kit

Our Price: 17.95

Screwdriver Set for Nintendo Products

Our Price: 8.95

20 Piece Tool Kit for Apple Products

Our Price: 16.95

Black Anti-Static Tape Strips (Kapton Tape)

Our Price: 6.95

Soldering Iron for Mac and iPod Repair - 30 Watts

Our Price: 6.95

5.5mm Nut Driver

Our Price: 4.95