|G3 wallstreet backlight fails on wake from sleep
|Page 1 of 1|
|Author:||Doc-a [ Tue May 04, 2004 1:22 pm ]|
|Post subject:||G3 wallstreet backlight fails on wake from sleep|
thanks in advance for any help
I have a wallstreet 266 that has OS X 10.2 where the backlight comes on on startup but will not light up after putting to sleep or closing lid. The LCD is functional as I can barely see an image.
|Author:||Guest [ Tue Jun 22, 2004 3:58 pm ]|
|Post subject:||mine too|
I have a 300mhz Wallstreet, and mine all of a sudden suffers from the same problem. What gives?
|Author:||unregistered [ Wed Jun 30, 2004 6:43 pm ]|
|Post subject:||No LCD upon wake up from sleep|
I have had the same problem, and I'm running OS8.6.1 on my WS/300: Frankly, I've never had an Apple laptop that could wake up properly Here's what I do with my WS: If it goes to sleep, press the power key to shut it off -- you'll hear the chime when the dialog box appears -- then press "Enter" to shut down, and re-boot. Then, set the computer to not sleep, but spin down the hard drive. Instead of sleeping, just turn down the brightness/contrast. Inelegant? Sure, but no sleep problems
|Author:||robw [ Sun Jan 09, 2005 5:57 pm ]|
This started for me after some updates to 10.2. I'm at 10.2.8 now. Solution? Boot into OS9, put the 'book to sleep once or twice, then boot back in to OSX. Your backlight problem should go away.
|Page 1 of 1||All times are UTC - 6 hours [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group