PowerbookMedic.com
http://www.powerbookmedic.com/forum/

Mac OS X 10.2
http://www.powerbookmedic.com/forum/viewtopic.php?f=2&t=380
Page 1 of 1

Author:  Borkowski [ Fri Oct 24, 2003 8:28 am ]
Post subject:  Mac OS X 10.2

I have tried to up grade my Lombard to Mac OS 10.2, but the computer keeps freezing. I have 512mb ram. Can all Lombards be upgraded to 10.2? I have the 400mhz model. Any Suggestions on what the problem might be!!!!! I was told to take out the top ram card and try to install, but same problem with installing 10.2

Author:  powerbookmedic [ Fri Oct 24, 2003 2:58 pm ]
Post subject: 

Some of the 400mhz processors don't take to installing OSX. Removing the top ram chip is one fix sometimes...other than that, installing a 64MB chip in the bottom slot is also a possible fix. If those don't work, then you probably have a 400mhz Revision 2.2 card, and those are known to have issues installing OSX.

-Bradley
POWERBOOKMEDIC.COM

Author:  Anonymous [ Fri May 14, 2004 1:05 am ]
Post subject:  Rev 2.2

How can you find out if your processor is rev 2.2 or etc.....

James

Author:  Guest [ Fri May 14, 2004 8:27 pm ]
Post subject: 

I have a Lombard 333mhz and it runs fine with 10.2.

I hear that Lombards have memory issues if you have over 356(or whatever the next step up from 256mb is) with Panther and Jaguar.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/