PowerbookMedic.com
http://www.powerbookmedic.com/forum/

333 cpu on a 400 logic board
http://www.powerbookmedic.com/forum/viewtopic.php?f=2&t=1018
Page 1 of 1

Author:  pbstar70 [ Wed Jan 12, 2005 5:34 am ]
Post subject:  333 cpu on a 400 logic board

Maybe a silly question: is it possible to install a 333 cpu on a logic board pulled from a 400 Lombard ?

Author:  buldogg [ Mon Jan 17, 2005 2:51 pm ]
Post subject:  logic board

yes it is they are the same boards, except the 400 should have the dvd decoder built into it. but the cpu should work fine as long as the motherboard is out of a Lombard

Author:  pbstar70 [ Tue Jan 18, 2005 4:34 am ]
Post subject: 

Thanks. I'll try.

Author:  powerbookmedic [ Sat Mar 05, 2005 1:39 pm ]
Post subject: 

Yes, you can install a 333mhz cpu in a Lombard 400, and you can install a 400mhz cpu in a 333 Lombard. They are compatible both ways.

-Bradley
PowerbookMedic

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/