|Mac Book Pro 1286
|Page 1 of 1|
|Author:||Mike76 [ Wed Jan 30, 2013 3:23 pm ]|
|Post subject:||Mac Book Pro 1286|
my macbook was working normally after an Apple Tech installed a new upgraded HDD 500 MB 7200 RPM Seagate. About 4 months later it doesn't recognize the HDD, and when I try to boot it with Snow Leopard OS DVD after a long pause, it tells me to reboot, and after I reboot the language selection screen appears, but the pointer is frozen, and doesn't respond. If I remove the HDD the DVD boots normally, and if I reinstall the HDD (without shutting down) it is not seen. I have tested the HDD with a Seagate Test Utility, using a Windows XP laptop, with a USB connection. The drive passes the Drive Short Test, a Generic Short Test (read-write), and the S.T.A.R.T. tests. What could possibly be the problem?
|Author:||justin-pbmedic [ Fri Feb 01, 2013 1:05 pm ]|
|Post subject:||Re: Mac Book Pro 1286|
It could be the hard drive cable or dirty contacts in side. I'd check that first.
|Page 1 of 1||All times are UTC - 6 hours [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group