PowerbookMedic.com
http://www.powerbookmedic.com/forum/

Not Booting after LCD replacement
http://www.powerbookmedic.com/forum/viewtopic.php?f=15&t=2512
Page 1 of 1

Author:  Guy Van Loo [ Tue Feb 02, 2010 3:25 pm ]
Post subject:  Not Booting after LCD replacement

The laptop was running at 1920 x 1200, Model A1229 so I ordered SKU12296.

When i replace the screen, the computer boots until the apple logo, after 20 sec the wheel stops spinning. The apple logo seems to be to big on the screen, looks like it is running on 800x600. Then the computer freezes. Zapped the PRAM a couple of times, pressed the powerbutton for 20 sec without the battery. Nothing works. When I place the old screen back, it all works again.

Any suggestions?

Author:  justin-pbmedic [ Wed Feb 03, 2010 5:48 pm ]
Post subject:  Re: Not Booting after LCD replacement

if the original screen still works, it is probably a defective LCD. I'd setup an RMA and we can get that one tested and a replacement sent.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/