LID NOT CLOSING LIKE IT SHOULD

jfire · **Joined:** Thu Apr 09, 2009 3:25 pm **Posts:** 2

SO YEAH THE RESULT OF WALKING AWAY WITH HEADPHONES ON WHILE THEY WERE STILL CONNECTED TO THE HEADPHONE PORT.

I HAVE PUSH IT DOWN AND THERE STILL SEEMS TO BE A GAP OF A COUPLE OF MILIMETERS WHEN I DO , AND IF I DONT PUSH IT DOWN IT LIKES TO STAY 2 INCHES ABOVE THE KEYBOARD

IS IT WORTH REPLACING/ FIXING OR COULD THIS BE SORTED MYSELF

justin-pbmedic · **Joined:** Thu Feb 27, 2003 6:35 am **Posts:** 977

unfortunately the headphone port is built onto the main logic board which will be an expensive repair. It probably isn't worth the repair just for that.

jfire · **Joined:** Thu Apr 09, 2009 3:25 pm **Posts:** 2

THANKS FOR THE REPLY

HEAD PHONE PORT IS SOUND , ITS JUST THAT I HAVE TO MOVE THE SCREEN ABOUT A THIRD AN INCH TO THE LEFT TO GET THE LATCH TO CATCH AND STAY CLOSED AS ITS LESS THAN ONE THIRD OF AN INCH TO THE RIGHT

justin-pbmedic · **Joined:** Thu Feb 27, 2003 6:35 am **Posts:** 977

most likely the hinges are bent or loose from the fall. you can go in and check out and make sure the screws are in all the way. otherwise you'll probably need a new clutch assembly.

we offer free diagnosis if you want to send it in and let us take a look at it. just click on the send-in service link to get started.

LID NOT CLOSING LIKE IT SHOULD

Who is online

Product Categories