|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 3 posts ] |
|
| Author |
Message |
|
crazybob
|
Post subject: Powerbook 12" LCD & Top Case Swap  Posted: Wed Feb 01, 2012 7:03 pm |
|
Joined: Wed Feb 01, 2012 6:30 pm
Posts: 2
|
|
My A1104 LCD is shot and the top cover (apple logo) is scratched and dented.
I'm using parts from an A1010. I removed the LCD from my A1104 without gutting the powerbook and it took only 20 minutes and the LCD from the A1010 works great in A1104.
The top cover that I want to swap has 2 airport antenna cables clipped to the inside of the top cover. They are soldered to a small board on each side of the inside cover, can I re-solder these wires? Do I need a special type of solder? Or is this just a simple soldering job?
|
|
| Top |
|
 |
|
justin-pbmedic
|
Post subject: Re: Powerbook 12" LCD & Top Case Swap Posted: Thu Feb 02, 2012 11:07 am |
|
 |
| Site Admin |
Joined: Thu Feb 27, 2003 6:35 am
Posts: 1015
|
|
I wouldn't recommend using a top case from a different model. The temperature sensors may not be compatible causing your fans to not work properly.
|
|
| Top |
|
|
|
crazybob
|
Post subject: Re: Powerbook 12" LCD & Top Case Swap Posted: Thu Feb 09, 2012 5:17 pm |
|
Joined: Wed Feb 01, 2012 6:30 pm
Posts: 2
|
|
I did NOT swap the top cases, I just swapped the lcd displays only.
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 3 posts ] |
|
Who is online |
Registered users: Google [Bot] |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
|
|
Login
Register
FAQ
Search
