Hi all!

My Pismo died when i by mistake removed the battery as it was running.
I was sure the power was connected but it was not : (

After it shut down i have tryed most of the tricks i know to get it going.
fn/ctrl/shift/powerbutton, reset button, leave it without power and battery, taking of the keyboard, checking the ram, check CPU and remounting it +++)
There is no sign of life at all, no light anywhere, no sounds, its just plain lifeless and dead. When i test the battery (pushing the test button) get a blinking LED (on the battery itself) On the Pismo everything is dead.

Anyone have a clue what is going on?

Needless to say, i really need the thing to work!

thanx

Jan

Hi all!

It turned out to be the powersupply.
The cord was broken just where it enters the plug.
I cut it open with a knife. And resoldiered it on the 1cm piece of cord that was inside the hard rubber coating on the plug itself.

Jippi : )

Jan