pismo won't "see" harddrive

bbzdrumz · **Posted:** Mon Sep 08, 2003 9:23 pm

My pismo will not recognize it's own hardrive.

I tried to change harddrives and was not able to get the new HD to work. So I tried to revert back to the stock setup and was then not able to read the original HD. I can start up from an install disc, but can't get the computer to see the HD

I am assuming something was affected during the procedure (Hopefully ribbon wire, it has what appears to be a burn mark on it. thought it was there from before, but not sure)

Will someone please give me a list of things to check, in order starting from the HD, in.

powerbookmedic · **Joined:** Mon Feb 24, 2003 1:58 am **Posts:** 944

The first thing to do is to check the ribbon wire, and possibly replace it. This is most likely the cause if your original setup doesn't work. If that doesn't fix you, then you may be looking at a logic board failure.

-Bradley
Powerbookmedic.com

pismo won't "see" harddrive

Who is online

Product Categories